7.
Set "Network Configuration Settings" of the module parameter of the master/local module as shown below.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2] [Basic Settings] [Network
Configuration Settings]
8.
Set "Refresh Setting" of the module parameter of the master/local module as shown below.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2] [Basic Settings] [Refresh Setting]
9.
Write the set parameters to the CPU module on the master station. Then reset the CPU module or power off and on the
system.
[Online] [Write to PLC]
For parameters of the master/local module which are not described in this procedure, set default values. For
details on parameters of the master/local module, refer to the following.
MELSEC iQ-R CC-Link IE Field Network User's Manual (Application)
APPX
176
Appendix 5 Operation Examples of When the Remote Head Module Is Mounted