TeamPoS 2000
5.9.7 Model D15 LCD Installation
5.9.7.1
Dispersed Stand Installation
Leave the protective sheet attached to the LCD until installation is complete. To install
the D15 LCD on either the dispersed stand or the stacked stand (in development):
1.
Place the LCD face down on a clean surface. Make
sure the surface is free of anything that might
damage the screen.
2.
Tip the stand on its front side until the cable
connector in the stand can be pushed onto the
connector on the D15.
5-46
Rev 3.0
MAINTENANCE MANUAL
90000291