Teamusb Board. Usb Connectors - 7 Ports - Fujitsu TeamPoS 2000 Installation And Maintenance Manual

TeamPoS 2000

5.5.1 TeamUSB Board. USB Connectors - 7 Ports

The TeamUSB board can only be used with the new riser card (Pin #KD20033-B41X).
When using the TeamUSB with the Pentium III motherboard, one of the USB ports on
the motherboard is used to connect the I/O board and a label covers one of the USB
connectors.
Pin #
1
2
3
4
5
6
7
8
Note: There are two riser cards: Pin #CA21259-B21X supports Retail I/O and
TeamCOMBO options only, PIN #KD20033-B41X supports all I/O Boards.
5-24
DC-Out Mode
5 VDC USB Power
Data -
Data +
Ground
24 VDC Return, USB ports 1, 2, 3 and 4
12 VDC Return, USB port 5, 6 & 7
24 VDC Power, USB ports 1, 2, 3 and 4
12 VDC Power, USB port 5, 6 & 7
24 VDC Power, USB ports 1, 2, 3 and 4
12 VDC Power, USB port 5, 6 & 7
24 VDC Return, USB ports 1, 2, 3 and 4
12 VDC Returnr, USB port 5, 6 & 7
Rev 3.0
MAINTENANCE MANUAL
Std. USB
Signals
12 or 24 VDC
Power
90000291