TeamPoS 2000
Chapter 9 BIOS SETUP PROCEDURES - A Motherboard
Follow the procedures shown below to set the PC board after replacement.
9.1
Opening CMOS Setup Screen - A Motherboard
Turn ON power and press the DEL key while a "PRESS DEL TO ENTER SETUP"
message is displayed in the lower part of the CRT or LCD. (See section 7.1.1 for power
on procedures.)
9.1.1 CMOS Settings - A Motherboard
In most cases, the CMOS default settings are adequate and do not require changing.
Follow the instructions on the screen to select STANDARD CMOS SETUP. To change
the time and date follow the instructions on the screen. Run LOAD BIOS DEFAULTS
first and then LOAD SETUP DEFAULTS. Exit, saving settings. Changing other
default settings can adversely effect the operation of the unit.
9.1.2 Main Menu - A Motherboard
Factory Default Settings
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURAITON
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS
ESC : Quit
F10 : Save & Exit Setup
90000291
ROM PCI/ISA BIOS (XXXXXXXX)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
CLOCK AND SENSOR
INTEGRATED PERIPHERALS
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
: Select Item
(Shift) F2 : Change Color
Rev 3.0
MAINTENANCE MANUAL
9-1