TeamPoS 2000
Hard Disk(s) fail (80)
HDD reset failed
Hard Disk(s) fail (40)
HDD controller diagnostics failed.
Hard Disk(s) fail (20)
HDD initialization error.
Hard Disk(s) fail (10)
Unable to recalibrate fixed disk.
Hard Disk(s) fail (08)
Sector Verify failed.
BIOS ROM checksum error - System halted.
The checksum of ROM address F0000H-FFFFFH is bad.
Memory test fail.
If system memory fails, BIOS reports an error.
9.1.18 BIOS Beep Code
The current BIOS has two types of beep codes. The first beep code indicates that an
error occurs in the video or BIOS fails in initialization for display. This beep code
consists of one long beep signal followed by two short beep signals.
The second beep code indicates that an error occurs in the DRAM (memory) and consists
of long repeated beep signals.
90000291
Rev 3.0
MAINTENANCE MANUAL
9-13