TeamPoS 2000
4.
Fit the MSR into the frame inside the MSR cover.
The circuit board should face the latch. This is the
only way that the MSR can be installed. Be sure
the connecting wires come out from under the
MSR on the circuit board side.
5.
Slip the end of the wire onto the pin connector in the
MSR space, smooth side up. The wires can only be
connected one way.
6.
Flip cover over and ease the MSR into the slot,
aligning the slot in the MSR beneath the slot in the
keyboard.
5.8.4 Model 104P Keyboard Unit (Compact Keyboard)
90000291
(PIN #'s 90000175)
Rev 3.0
MAINTENANCE MANUAL
5-33