Fujitsu TeamPoS 2000 Installation And Maintenance Manual page 99

TeamPoS 2000
When using dual screens and the TeamUSB (90000803) or TeamCOMBO II (9001036)
I/O boards, only one D15 LCD may be powered by the TeamPoS 2000 using the powered
USB connector. The second screen is powered using a power brick. The data for the
screen which uses the power brick requires a standard A to A USB connector. Keep in
mind that each LCD must use a different video connector, one VGA and one DVI as
shown below. If a Retail I/O or TeamCOMBO board are used, both LCDs must be
powered from a power brick.
TeamPoS 2000 & TeamCOMBO or TeamUSB Board
and/or SmartPoSMSR and/or SmartPoSKeyPad
90000291
or Retail I/O Board (with M Motherboard only)
Dual Screen Configuration w/Touch
Rev 3.0
MAINTENANCE MANUAL
5-43