Siemens SINAMICS S120 Manual page 106
Cabinet modules liquid cooled
Hide thumbs
Also See for SINAMICS S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
Electrical installation
4.5 Connections
Cable routing for DRIVE-CLiQ connections and signal cables
1.
2.
3.
4.
5.
6.
7.
8.
9.
104
Route the DRIVE-CLiQ/signal cable to the Control Unit into the cabinet from the bottom left.
Use cable ties to secure the cable at suitable points.
Route the cable further in the cabinet to the upper side of the Control Unit. When doing so, route
the cable in a similar manner to the standard cables that have already been installed in the cabi-
net.
Use cable ties to secure the cable at suitable points.
Connect DRIVE-CLiQ/signal cable to the Control Unit.
Route the DRIVE-CLiQ/signal cable to the Basic Line Module from the bottom left into the cabi-
net.
Use cable ties to secure the cable at suitable points.
Route the cable further in the cabinet to the upper side of the Basic Line Module. When doing so,
route the cable in a similar manner to the standard cables that have already been installed in the
cabinet.
Use cable ties to secure the cable at suitable points.
Cabinet Modules liquid cooled
Equipment Manual, 04/2020, A5E37067587A
Advertisement
Table of Contents
