Mounting Equipment For Power Units - Siemens SINAMICS S120 Manual
Cabinet modules liquid cooled
Hide thumbs
Also See for SINAMICS S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
7.5.4
Mounting equipment for power units
Mounting equipment
The mounting equipment is used to mount or remove liquid-cooled power units (Active Line
Modules, Basic Line Modules, Motor Modules) into or out of a control cabinet.
The mounting equipment is used to help mount the device; it is placed in front of the power
unit, and attached to the mounting rails below the power unit.
Using the telescopic rails, the mounting equipment can be adapted to the actual mounting
height and the power unit width. The power unit can be removed from the control cabinet
after releasing the mechanical and electrical connections and the coolant connections.
Whereby the power unit is guided and supported by the guide rails on the mounting
equipment. To prevent it toppling over, the power unit must be secured to a crane, tripod or
similar assembly using the lifting lugs or the lifting equipment. The device can then be
lowered down from the mounting equipment.
Figure 7-4
Article number of the mounting equipment
The article number for the mounting equipment is 6SL3766-1CA00-0AA0.
Cabinet Modules liquid cooled
Equipment Manual, 04/2020, A5E37067587A
Mounting aid
Maintenance and servicing
7.5 Replacing components
247
Advertisement
Table of Contents
