Siemens SINAMICS S120 Manual page 73

Item Activity
19 G60,
TM31 Terminal
Module
20 G61,
additional TM31
Terminal Module
21 G62,
TB30 Terminal Board
22 K01 to K05,
Safety license for 1 to
5 axes
23 K46,
SMC10 Sensor
Module
24 K48,
SMC20 Sensor
Module
25 K50,
SMC30 Sensor
Module
Cabinet Modules liquid cooled
Equipment Manual, 04/2020, A5E37067587A
Digital inputs, digital outputs, analog inputs, analog outputs
and temperature sensors can be connected to the TM31 Ter-
minal Module.
(→ see Chapter "Options", Section "G60, Terminal Module
TM31")
Additional digital inputs, digital outputs, analog inputs, analog
outputs and temperature sensors can be connected to the
additional TM31 Terminal Module.
(→ see Chapter "Options", Section "G61, additional TM31
Terminal Module ")
Digital inputs, digital outputs, analog inputs and analog out-
puts can be connected to the TB30 Terminal Board
(→ see Chapter "Options", Section "G62, TB30 Terminal
Board")
Activating the safety licenses.
(→ See Chapter "Options", Section "K01 to K05, Safety li-
cense for 1 to 5 axes")
The SMC10 Sensor Module is used for detecting the actual
motor speed and the rotor position angle.
The following encoders are supported by the SMC10 Sensor
Module:
Resolver, 2-pin
•
Resolver, multi-pole
•
(→ See Chapter "Options", in Section "K46, SMC10 Sensor
Module Cabinet-Mounted")
The SMC20 Sensor Module is used for detecting the actual
motor speed and the path length.
The following encoders are supported by the SMC20 Sensor
Module:
Incremental sin/cos 1Vpp
•
EnDat absolute encoder
•
SSI encoder
•
(→ See Chapter "Options", in Section "K48, SMC20 Sensor
Module Cabinet-Mounted")
The SMC30 Sensor Module is used for detecting the actual
motor speed.
The following encoders are supported by the SMC30 Sensor
Module:
TTL encoder
•
HTL encoder
•
SSI encoder
•
(→ See Chapter "Options", in Section "K50, SMC30 Sensor
Module Cabinet-Mounted")
Electrical installation
4.2 Electrical installation: Checklist
Applicable?/Completed?
71