Input Range (Buffer Memory Address 32, 64: Un\G32, Un\G64) - Mitsubishi Electric MELSEC-Q Series User Manual

3 SPECIFICATIONS

3.5.11 Input range (buffer memory address 32, 64: Un\G32, Un\G64)

3 - 82
(1) Set the input range setting value according to the sensor and measuring range
used. The following table lists the types of input sensor connectable to the
Q62HLC and their setting ranges.
Input
Thermocouples
PL II
W5Re/
W26Re
Micro voltage
Voltage
Current
(2) Set the input range in the setting mode (Yn1: OFF).
To enable the setting value after change, turn on Setting change command
(YnB).
(3) For about five seconds after the input range setting is changed, 0 is set to
Measured value (PV) (buffer memory address: 9, 10), and then the control is
resumed.
Input range
K -200 to 1372
J -200 to 1200
T -200 to 400
S -50 to 1768
R -50 to 1768
N 0 to 1300
E -200 to 1000
B 0 to 1800
0 to 1390
0 to 2300
0 to 10mV
0 to 100mV
-10 to 10mV
-100 to 100mV
0 to 1V
1 to 5V
0 to 5V
0 to 10V
-1 to 1V
-5 to 5V
-10 to 10V
4 to 20mA
0 to 20mA
MELSEC-Q
Setting value
0 (default)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
3 - 82