Mitsubishi Electric MELSEC-Q Series User Manual page 178

5 UTILITY PACKAGE (GX Configurator-TC)
5 - 19
[Explanation of items]
(1) Items
Module side Buffer
size
Module side Transfer
word count
Transfer direction
PLC side Device
(2) Command buttons
Make text file
End setup
Cancel
POINT
The auto refresh settings are stored in an intelligent function module parameter file.
(1) Cycle the RUN/STOP switch of the CPU module: STOP
RUN.
(2) With the RUN/STOP switch set to RUN, turn off and then on the power or reset
the CPU module.
: Displays the buffer memory size of the setting item.
: Displays the number of words to be transferred.
: " " indicates that data are written from the
programmable controller CPU to the buffer memory.
" " indicates that data are loaded from the buffer
memory to the programmable controller CPU.
: Enter a CPU module side device that is to be
automatically refreshed.
Applicable devices are X, Y, M, L, B, T, C, ST, D, W, R,
and ZR. When using bit devices, X, Y, M, L or B, set a
number that can be divided by 16 points (examples:
X10, Y120, M16, etc.).
Also, buffer memory data are stored in a 16-point area,
starting from the specified device number. For example,
if X10 is entered, data are stored in X10 to X1F.
Creates a file containing the window data in the text file
format.
Saves the set data and ends the operation.
Cancels the setting and ends the operation.
MELSEC-Q
RUN STOP
5 - 19