LTE CPE B2368
User Guide
Label
Auth Protocol
Server IP Address
User Name
Password
Apply
Back
13.3 The Monitor Screen
Use this screen to monitor L2TP VPN tunnel status. Click Security > L2TP VPN > Monitor
to open the following screen.
Figure 13-3 Security > L2TP VPN > Monitor
The following table describes the fields in this screen.
Table 13-3 Security > L2TP VPN > Monitor
Label
#
Status
Tunnel Name
Server IP
L2TP Server
IP
Issue 03 (2019-01-31)
Description
Select the protocol (EAP, MSCHAPv1 or MSCHAPv2) the LTE
Device uses for user authentication.
Enter the IP address of the remote gateway.
Enter a user or user group that can use the L2TP VPN tunnel.
Enter the password for the user.
Click this button to save your settings back to the LTE Device.
Click this button to return to the previous screen without saving any
changes.
Description
This shows the index number of the rule. Select the checkbox next to the
rule to activate it.
This shows the status of the L2TP VPN tunnel.
This shows the name of this tunnel.
This shows the IP address of the remote gateway.
This shows the IP address that the LTD Device assigned for the remote
user's computer to use within the L2TP VPN tunnel.
Copyright © Huawei Technologies Co., Ltd.
13 L2TP VPN
98