LTE CPE B2368
User Guide
Label
Interval
Configuration
Enable
Hook Flash
Detect Upper
Bound
Hook Flash
Detect Lower
Bound
Apply
Back
15.4 The Phone Region Screen
Use this screen to maintain settings that depend on which region of the world the LTE Device
is in. To access this screen, click VoIP > Phone > Region.
Figure 15-5 VoIP> Phone > Region
Each field is described in the following table.
Table 15-4 VoIP > Phone > Region
Label
Region
Settings
Issue 03 (2019-01-31)
Description
You can tap the phone's hook to signal a flash in order to control certain
functions. Select this to manually configure the flash detect interval
(how long of a press on the phone's hook the LTE Device counts as a
flash).
If this configuration is disabled, the flash interval will be set according
to the region selected in VoIP > Phone > Region Settings.
Specify the longest hook press to count as a flash. The LTE Device
interprets a hook press longer than this as hanging up.
Specify the shortest hook press to count as a flash.
Click Apply to save your changes.
Click Back to return to the previous screen without saving.
Description
Select the place in which the LTE Device is located.
Copyright © Huawei Technologies Co., Ltd.
15 VoIP
122