Ways To Manage The Lte Device; Good Habits For Managing The Lte Device; Hardware - Huawei B2368 User Manual

LTE CPE B2368
User Guide
Step 2 Press the WIRELESS On/Off button for one second and release it. The WLAN/WPS LED
should change from on to off or vice versa.
----End
Activate WPS
Step 1 Make sure the PWR/SYS LED is on (not blinking).
Step 2 Press the WIRELESS On/Off button for more than five seconds and release it. Press the
WPS button on another WPS-enabled device within range of the LTE Device. The WLAN/
WPS LED should flash while the LTE Device sets up a WPS connection with the wireless
device.
----End

1.3 Ways to Manage the LTE Device

Web Configurator is for management of the LTE Device using a (supported) web browser.

1.4 Good Habits for Managing the LTE Device

Do the following things regularly to make the LTE Device more secure and to manage the
LTE Device more effectively.
l
l
l

1.5 Hardware

Issue 03 (2019-01-31)
NOTE
You must activate WPS in the LTE Device and in another wireless device within two minutes of each
other. See 5.4 The WPS Screen
Change the password. Use a password that's not easy to guess and that consists of
different types of characters, such as numbers and letters.
Write down the password and put it in a safe place.
Back up the configuration (and make sure you know how to restore it). Restoring an
earlier working configuration may be useful if the device becomes unstable or even
crashes. If you forget your password to access the Web Configurator, you will have to
reset the LTE Device to its factory default settings. If you backed up an earlier
configuration file, you would not have to totally re-configure the LTE Device. You could
simply restore your last configuration. Keep in mind that backing up a configuration file
will not back up passwords used to set up your VoIP account. Write down any
information your ISP provides you.
Copyright © Huawei Technologies Co., Ltd.
for more information.
1 Introduction
3