The Static Dhcp Screen; Before You Begin - Huawei B2368 User Manual

LTE CPE B2368
User Guide
Label
DHCP Relay
DHCP Relay
Server
Apply
Cancel

6.3 The Static DHCP Screen

This table allows you to assign IP addresses on the LAN to specific individual computers
based on their MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.

6.3.1 Before You Begin

Find out the MAC addresses of your network devices if you intend to add them to the Static
DHCP screen.
Use this screen to change your LTE Device's static DHCP settings. Click Network Setting >
Home Networking > Static DHCP to open the following screen.
Figure 6-3 Network Setting > Home Networking > Static DHCP
The following table describes the Labels in this screen.
Table 6-2 Network Setting > Home Networking > Static DHCP
Label
Add new static
lease
#
Issue 03 (2019-01-31)
Description
DHCP relay fields display when you disable DHCP.
Select Enable if you have the IP address of a DHCP server to use.
Select Disable if you do not have the IP address of a DHCP server to
use.
When DHCP relay is used, the following field needs to be set.
Enter the IP address of the DHCP server to use.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
Description
Click this to add a new static DHCP entry.
This is the index number of the entry.
Copyright © Huawei Technologies Co., Ltd.
6 Home Networking
61