Huawei B2368 User Manual page 56

LTE CPE B2368
User Guide
Figure 5-9 Network Setting > Wireless > WPS
The following table describes the Labels in this screen.
Table 5-6 Network Setting > Wireless > WPS
Label
Enable WPS
Add a new device with WPS Method
Method 1 PBC
WPS
Method 2 PIN
Register
Issue 03 (2019-01-31)
Description
Select Enable to activate WPS on the LTE Device.
Use this section to set up a WPS wireless network using Push Button
Configuration (PBC).
Click this button to add another WPS-enabled wireless device (within
wireless range of the LTE Device) to your wireless network. This button
may either be a physical button on the outside of device, or a menu
button similar to the WPS button on this screen.
Note: You must press the other wireless device's WPS button within two
minutes of pressing this button.
Use this section to set up a WPS wireless network by entering the PIN
(Personal Identification Number) of the client into the LTE Device.
Enter the PIN of the device that you are setting up a WPS connection
with and click Register to authenticate and add the wireless device to
your wireless network.
You can find the PIN either on the outside of the device, or by checking
the device's settings.
Note: You must also activate WPS on that device within two minutes to
have it present its PIN to the LTE Device.
Copyright © Huawei Technologies Co., Ltd.
5 Wireless
48