Huawei B2368 User Manual page 50

LTE CPE B2368
User Guide
Label
BandWidth
Channel Selection
Operating Channel
Security Level
Security Mode
Apply
Cancel
No Security
Figure 5-4 Wireless> General: No Security
Issue 03 (2019-01-31)
Description
Select the channel bandwidth the LTE Device's wireless LAN uses.
For 5 GHz wireless, select 20/40/80 MHz to allow the LTE Device
to use 1, 2, or 3 channels for maximum throughput.
Select 20/40 MHz to allow the LTE Device to use 1 or 2 channels.
Select 20 MHz to lesson radio interference with other wireless
devices in your neighborhood.
Set the channel depending on your particular region.
Select a channel or use Auto to have the LTE Device automatically
determine a channel to use. If you are having problems with wireless
interference, changing the channel may help. Try to use a channel
that is as many channels away from any channels used by
neighboring APs as possible. The channel number which the LTE
Device is currently using then displays in the Operating Channel
field.
This is the channel currently being used by your AP.
Select More Secure to add security on this wireless network. The
wireless clients which want to associate to this network must have
the same wireless security settings as the LTE Device. When you
select to use security, additional options appears in this screen.
Or you can select No Security to allow any client to associate this
network without any data encryption or authentication.
See the following sections for more details about wireless security
modes.
Click Apply to save your changes back to the LTE Device.
Click Cancel to restore your previously saved settings.
NOTE
Select No Security to allow wireless stations to communicate with the access points without any data
encryption or authentication.
If you do not enable any wireless security on your LTE Device, your network is accessible to any
wireless networking device that is within range.
Copyright © Huawei Technologies Co., Ltd.
5 Wireless
42