Huawei B2368 User Manual page 182

LTE CPE B2368
User Guide
If you restore the default configuration, you may need to change the IP address of your
computer to be in the same subnet as that of the default device IP address (192.168.1.1).
If the upload was not successful, an error screen will appear. Click OK to go back to the
Configuration screen.
Reset to Factory Defaults
l
Figure 26-3 Reset Warning Message
Figure 26-4 Reset In Progress Message
l
Issue 03 (2019-01-31)
Click the Reset button to clear all user-entered configuration information and return the
LTE Device to its factory defaults. The following warning screen appears.
You can also press the RESET button on the back panel to reset the factory defaults of
your LTE Device. Refer to Section 1.7 on page 6 for more information on the RESET
button.
Copyright © Huawei Technologies Co., Ltd.
26 Backup/Restore
174