Sim Screen - Huawei B2368 User Manual

LTE CPE B2368
User Guide
Label
IP Pass Through
Mode
Specific Device
MAC Address
IP Pass Through
Lease Time
Apply
Back

4.3 SIM Screen

If your LTE Device has the SIM screen, you may use it to specify the PIN for your SIM card.
Click Network Setting > Broadband > SIM to open the following screen.
Figure 4-3 Network Setting > Broadband > SIM
The following table describes the fields in this screen.
Issue 03 (2019-01-31)
Description
Select Dynamic to give the client get the ISP allocated IP via DHCP
with 5 minutes lease time.
Select Static to allow only clients with a designated MAC address to
get the ISP allocated IP via DHCP.
When you set the IP pass mode to static, specify the designated MAC
address here.
Specify for how many seconds the LAN client can use the ISP assigned
IP address.
Click Apply to save your changes.
Click Back to return to the previous screen.
Copyright © Huawei Technologies Co., Ltd.
4 Broadband
31