GE LOGIQ E9 Service Manual page 306

GE
D 5573152-100, R
IRECTION
8-4-7 Loading the Application Software Only (cont'd)
NOTE: The window reflects the actual software version instead of "R6.0.6EP1_L9_, as shown above.
4.) If indicated, press any key to continue.
NOTE: When the LoadSoftware Information Window displays asking you to select OK, do nothing. This
window closes automatically.
5.) Wait while the software loads (approximately 7-8 minutes). Do not interrupt this process and ignore
any errors.
Do not interrupt the software load at any time.
WARNING WARNING
After the software load is complete, the system reboots.
Do not try to prevent the reboot.
NOTICE
8 - 22
. 2
EV
Figure 8-9 Command Window
Figure 8-10 LoadSoftware Information Window - Do not select OK
Section 8-4 - Loading / Reloading / Upgrading the Software
LOGIQ E9 S M
ERVICE ANUAL