GE LOGIQ E9 Service Manual page 579

GE
D 5573152-100, R
IRECTION
8-12-2 Assembling or replacing the Roll Stand (cont'd)
5.) Loosen the knob slightly, guide the arm into the channel and move it to the mounting position.
NOTE: Make sure the Transformer Support Platform (larger view) in Figure 8-65 "Loosening Knob" on
page 8-295 is installed in the UP position.
NOTE: The channel fits between the front and rear slide plates.
. 2
EV
Figure 8-65 Loosening Knob
Figure 8-66 Channel Location
Chapter 8 Replacement procedures
LOGIQ E9 S M
ERVICE ANUAL
8 - 295