GE LOGIQ E9 Service Manual page 98

D 5573152-100, R
IRECTION
4-2-4 Top Console position adjustment
The system Top Console can be freely moved in all directions (if the power is on or if the mechanism is
not locked in position prior to powering down the system). The vertical displacement of the Top Console
is motor driven. The control buttons are located around the handles.
To avoid injury or damage, make sure nothing is within the range of motion before moving the
CAUTION
Top Console. This includes both objects and people.
Power on the LOGIQ E9 before performing the following steps.
Figure 4-3 Top Console adjustment controls: Lock (1), Up/Down (2)
To raise/lower the Top Console
1.) Press and hold down the Up/Down button (Figure 4-3, button 2) accordingly to raise or lower the
Top Console.
2.) Release the button when the Top Console is at the desired height.
4-2-4-1 To unlock the Top Console
1.) Press and hold down the Lock and brake release button(s)
Console out of the locked position until the Top console is in the desired position.
2.) Release the button(s).
4-2-4-2 To lock the Top Console
1.) Press and hold down the Lock and brake release button(s)
the Top Console in the locked position.
2.) Release the button(s).
4-2-4-3 To move the floating Top Console
1.) The unlocked Top Console can be easily moved by pressing and holding down the Lock and brake
release button(s)
2.) Release the button when the Top Console is at the desired height.
4-2-4-4 To move the Top Console if Power is OFF
To manually release the console's XY-mechanism (frogleg) if the power is OFF, see:
"Operator Panel movement" on page
4 - 8
. 2
EV
1. Lock button: unparking and sideways displacement of the console.
2.Up/Down button: raising/lowering the console.
(Figure 4-3, button 1) and move the Top Console in any direction.
Section 4-2 - General procedures
6-19.
LOGIQ E9 S
ERVICE
(Figure 4-3, button 1) and pull the Top
(Figure 4-3, button 1) while pushing
Section 6-5
M
ANUAL