Table of Contents
Advertisement
Loading Control Levers
The lift arm control lever and the bucket control lever are
used to operate the lift arm and/or bucket.
Lift Arm Control Lever (1)
Lever
Position
Float (Detent):
The lift arm free falls and can be moved as
C
loads are applied. The lever will stay in this
position.
B
Lift Arm Lower
Hold:
N
The lift arm is stopped and held in that
position.
A
Lift Arm Raise
Detent:
F
The lift arm is held in the raise position with
the detent.
Bucket Control Lever (2)
Lever
Position
Bucket Dump:
E
The bucket is tilted forward to dump the
bucket.
Hold:
N
The bucket is stopped and held in that
position.
Bucket Tilt (or roll back):
D
The bucket is tilted back; (also this is the
transportation position).
Detent:
When the bucket control lever is moved from
G
the bucket dump position to the bucket tilt
(or roll back) position, the bucket control
lever is held in this position with the detent.
f
NOTE:
When applying the lift arm control lever (1) in the
"Raise" position (A), the lever is moved (F) until the lift
arm reaches the position set at the height kickout.
When the lift arm moves to the preset position, lift arm
control lever (1) automatically moves to "Neutral" (N)
position.
When applying the bucket control lever (2) in the "Tilt"
position (D) after bucket dump operation; the lever
is moved (G) until the bucket moves to the position
preset by the bucket auto leveler. When the bucket
moves to the preset position, bucket control lever (2)
automatically moves to "Neutral" (N) position.
OPERATOR'S STATION
Lift Arm Operation
Bucket Operation
E
2
N
D
G
E
N
D
1-96
C
B
1
N
A
F
MNEC-03-003
C
B
N
A
M4GB-01-072
M4GB-01-073
Advertisement
Table of Contents
Troubleshooting
