Table of Contents
Advertisement
Display
Contents of Alarms
Engine Overheat Alarm
Hydraulic Oil Overheat Alarm
Axle Oil Temperature Alarm
Transmission Oil Temperature
Alarm
Engine Warning Alarm (Yellow)
Transmission Alarm
Engine Oil Pressure Alarm
Main Pump Oil Pressure Alarm
Battery Charge Alarm
Air Cleaner Clogging
Water Separator Alarm
(Option)
OPERATOR'S STATION
Coolant temperature is above normal. Stop operation. Run the engine
at slow idle speed to lower the coolant temperature. When needed,
add coolant.
Hydraulic oil temperature is above normal. Stop operation. Run the
engine at slow idle speed to lower the oil temperature.
Axle oil temperature is above normal. Check if the service brake drags.
Transmission oil temperature is above normal. Stop operation. Run
the engine at slow idle speed to lower the oil temperature.
Use correct range for machine operation, and do not stall torque
converter.
Engine or engine related parts are abnormal. Immediately set the
machine in the park position, apply parking brake, stop the engine
and contact your authorized dealer.
Transmission or transmission related parts are abnormal. Immediately
set the machine in the park position, apply parking brake, stop the
engine and contact your authorized dealer.
Engine oil pressure has decreased.
Immediately stop the engine, and apply parking brake. Check the
engine oil system and oil level.
Main pump oil pressure has decreased. Stop machine operation, and
apply parking brake. Check the piping of front attachment for oil
leaks.
Electrical system charge is abnormal.
Inspect the alternator and the battery system.
Air filter elements are clogged.
Clean or replace air cleaner element.
Water separator is full. Drain water.
1-30
Remedy
Advertisement
Table of Contents
Troubleshooting
