Table of Contents
Advertisement
Metal Face Seal Fittings
Fittings are used on smaller hoses and consist of a metal
flare and a metal flare seat.
1. Inspect flare (10) and flare seat (9). They must be free
of dirt or obvious defects.
2. Tighten fitting (7) by hand.
3. Tighten fitting (7) or nut (8) to the torque values
shown. Do not allow hose (5) to twist when
tightening fittings.
MAINTENANCE
7-58
90M202-07-051
Advertisement
Table of Contents
Troubleshooting
