Auto; Off - Hitachi ZW 310-6 Operator's Manual

AUTO

When ride control switch (1) is turned to AUTO, the drive
speed sensor and the controller is activated. Then, when
the drive speed increases above the preset travel speed,
the ride control system automatically operates.
When the drive speed decreases below the preset travel
speed, the ride control system becomes inoperable.
When ride control switch (1) is turned to AUTO mode,
the ride control indicator (2) on the monitor display
comes ON.

OFF

When ride control switch (1) is turned OFF, ride control
indicator (2) on the monitor display goes OFF and the
ride control system becomes inoperable.
When the key switch is in the OFF position, the ride
control system does not operate even if ride control
switch (1) is in the AUTO position. When the engine is
stopped while ride control switch (1) is in AUTO, the ride
control is turned OFF.
OPERATOR'S STATION
1-109
1
AUTO
OFF
Only AUTO is provided
2
1
MNEC-01-041
MNEC-01-022
MNEK-01-100EN