Hitachi ZW 310-6 Operator's Manual page 212

5. Check that control lever lock switch (7) is in the locked
( ) position.
6. Adjust the position of outside rear view mirror (8) and
inside rear view mirror (9) so that the best rear visibility
can be obtained.
7. While seated on the operator's seat with your back in
contact with the backrest, adjust each function of the
seat so that the brake pedal can be fully applied.
8. Fasten seat belt (10) along your body without kinking
or twisting it. Be sure the buckle firmly snaps when
coupled and works as it should, and the retractor and
anti-synch mechanism work as designed.
9. Inspect seat belt.
OPERATING THE ENGINE
3-4
9
8
7
MNEC-07-001
M4GB-01-126
10
MNEC-01-045