Hitachi ZW 310-6 Operator's Manual page 407

Wheel loader
Hide thumbs Also See for ZW 310-6:
Table of Contents

Advertisement

MAINTENANCE UNDER SPECIAL ENVIRONMENTAL CONDITIONS
d
DANGER:
Ventilate the area with fresh air when
carrying out warm-up operation indoor. Failure to do
so may cause asphyxiation from exhaust gas, resulting
in death or severe injury.
6. After preheating, start and warm up the engine.
7. After warming up the engine, warm up the loading
hydraulics. Slowly operate the control levers to move the
cylinders full stroke several times. Do not force cylinders
to go to the end of their stroke.
8. Road surfaces covered with snow, especially when snow
has been compacted, will be frozen. Use tire chains on all
four wheels.
9. Take anti-freeze measures after completing operation.
 Spray keyholes with light oil. Cover the keyhole by
sticking a tape on.
 Rubber parts such as wiper blades may freeze. Keep other
parts away from the rubber parts. Warm up cab prior to
use of wipers.
 Remove packed snow from around the axles, articulation
joint and inside the machine with a bar or brush. Be
careful not to damage electrical wiring.
 In case it is impossible to store the machine indoors, park
the machine on a level dry surface and cover the machine
with a large machine cover.
 Keep 80% of tank capacity when storing DEF/AdBlue®.
The DEF/AdBlue® tank maybe broken if frozen.
f
NOTE: DEF/AdBlue® starts freezing at -10°C (12°F). Freezing
does not affect its performance once thawed.
9-3

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents