Beko METPOINT BDL Instructions For Installation And Operation Manual page 34

SD card and battery
-
METPOINT
SD card replacement
1. Unscrew the screws of the housing cover and open the cover
2. Slightly press the existing SD card and remove it from the SD card slot
3. Insert the new SD card into the SD card slot until it clicks into place – position according to the illus-
tration
4. Refasten the cover of the housing
Battery replacement
1. Unscrew the screws of the housing cover and open the cover
2. Carefully remove the existing battery
3. Insert the new battery – position according to the illustration
4. Refasten the cover of the housing
34
180°
®
BDL
SD
+
CR 2032
3 V
+
Einbaulage Gehäuse (innen)
SD
+
CR 2032
3 V
METPOINT® BDL