Marking And Setting Text Fields - Beko METPOINT BDL Instructions For Installation And Operation Manual

Operation BDL

14.2.2.7 Marking and setting text fields

Main menu  Settings  Sensor settings  A1
The alarm (see Chapter
measuring data), the resolution
Chapter 12.2.2.2 Denoting the measuring data and determining the resolution of the decimal
as the advanced settings
Sensor settings.
Main menu  Settings  Sensor settings  A1  Text field name
46
12.2.2.4 Alarm settings)
of the decimal places and the
(see Chapter 12.2.2.5 Advanced
If the data logger is activated, the following
window appears. By pressing
logger can be activated.
(only activated when settings and recordings were al-
ready implemented)
Note:
When sensor settings are implemented or
changed, the data logger must be on STOP.
By pressing the fields with the white
background, changes or entries can be
implemented.
and recording buttons (see Chapter
short name
settings) are all described in Chapter
It is possible to enter a name with up to 24
characters.
yes, the data
12.2.2.3 Recording
or the value name (see
places), as well
12.2.2
METPOINT® BDL