Current Values; Alarm Overview - Beko METPOINT BDL Instructions For Installation And Operation Manual
Graphic display-recorder
Hide thumbs
Also See for METPOINT BDL:
Table of Contents
Advertisement
14.5 Current values
Main menu Current values
Main menu Current values A1
14.6 Alarm overview
Main menu Alarm overview
This is an
alarm-1
for channel A3 and an
METPOINT® BDL
The
current values
measured values of all the connected sensors.
In the event that the adjusted alarm limits are
exceeded or underrun, the respective meas-
ured value flashes yellow (alarm-1) or red
(alarm-2).
The individual channels can be selected and
the settings viewed and checked, but no
changes can be implemented here.
Note:
Changes must be effectuated in the settings!
In the
alarm overview,
see whether the alarm is an
alarm-2.
This is also evident in other menu items:
Main menu Current values
menu Settings Sensor setting
The channel indication flashes yellow for an
alarm-1
and red for an alarm-2.
Moreover, one can see which relays were set
for which channel as an
alarm-2.
This is indicated by the yellow and red or
red/yellow squares at the intersections be-
tween measuring channel and relay.
alarm-2
for channel A4!
Operation BDL
view shows the current
you can immediately
alarm-1
or an
and in
Main
alarm-1
and/or as an
91
Advertisement
Table of Contents
