Operation BDL
Main menu Alarm overview A1
14.7 Further setting options
14.7.1 Brightness
Main menu Settings Brightness
Note: at the first touch, the
Afterwards, "normal" functional operation is possible again.
Important: when the
darken-after
currently set brightness.
92
brightness
in our example is reset to 50%.
button is not activated, the backlighting is continuously on, at the
As with
Main menu Current values,
vidual channels can be selected here.
In the
alarm overview,
which measured value has exceeded or
underrun the alarm range.
Note:
The alarm parameters can be set and/or
changed here.
Here, the desired
brightness
(15 ... 100%) of the display can directly be
set.
E.g.:
brightness
to 50%
By means of the
darken-after
brightness
can be reduced to a minimum at
the end of a time interval to be defined
(here after 15 minutes).
As soon as the dimmed screen is activated
again, the
brightness
back to the value that was last set prior to
dimming.
indi-
it is quickly visible
button, the
automatically goes
METPOINT® BDL