Performance Characteristics - Beko METPOINT BDL Instructions For Installation And Operation Manual

4

Performance characteristics

Our longstanding practical experience in measuring and control technology was implemented in the new
BDL.
Stretching from the measuring data acquisition and automatic sensor identification via the visualisation on
the large color display, alarm signal, and storage, to the remote readout via web server – all of this is possi-
ble with the BDL. An alarm message can be sent via SMS or e-mail in connection with the BEKO
METPOINT connect software.
With the large 7" color display with a touch panel, all of the information is visible at a glance. Operation is
very easy. All the measured values, measured curves, and exceeded limit values are displayed. With a sim-
ple finger movement, the curve courses can be tracked from the start of
the measurement.
Daily, weekly, and monthly evaluations with the costs being indicated in the respective local currency, e.g.
euro (€), and the counter reading in cubic metres (m³)) of each consumption sensor complete the elaborated
system idea.
The big difference to standard, paperless screen recorders is reflected in the simplicity of the start-up and in
the measuring data evaluation. All of the sensors are directly identified by the BDL, and they are provided
with voltage. Everything is ideally matched.
METPOINT® BDL
Performance characteristics
Multifunctional:
The BDL automatically identifies up to 12
sensors including all BEKO sensors (con-
sumption, dew point, pressure, current, KTY,
Pt100, Pt1000).
Any analog sensors (0/4 – 20 mA,
0 – 1/10/30 V, pulse) can easily and quickly
be configured. Digital sensors can be con-
nected via RS 485, Modbus RTU, and SDI.
Alarm relay/trouble
tions:
Up to 32 limit values can be
freely configured and assigned
to four different alarm relays.
Collective alarms are possible.
Flexible:
Network-compatible, and
remote data transmission
worldwide via Ethernet, inte-
grated web server.
indica-
7