Safety Instructions - Beko METPOINT BDL Instructions For Installation And Operation Manual

Safety instructions

3 Safety instructions
Please check whether or not these instructions correspond to the device type.
Please adhere to all advice given in these operating instructions. They include basic information
which needs to be observed during installation, operation and maintenance. Therefore, it is vital
for the technician and the responsible operator and user to read these operating instructions
prior to installation, start-up and maintenance.
The operating instructions must be accessible at all times at the place of application of the
METPOINT BDL. In addition to these operating instructions, local and national regulations
®
need to be observed, where required.
Ensure that operation of the METPOINT
ues indicated on the type plate. Any deviation from these limit values involves a risk for persons
and for the material, and may result in malfunction or a breakdown.
If you have any queries regarding these installation and operating instructions, please contact
BEKO TECHNOLOGIES GMBH.
Warning!
Risk of injury in the event of insufficient qualifications!
Improper use
All of the activities described in these operating instructions must only be carried out by
qualified personnel with the qualifications described hereinafter.
Qualified personnel
Due to the specific training and knowledge concerning the measuring and control technology, and due to
their experience and knowledge of the country-specific provisions, standards in force and directives, qualified
personnel are capable of carrying out the described work and of independently identifying the possible risks.
Special employment conditions require further corresponding knowledge, e.g. regarding aggressive media.
Caution!
Malfunctions of the BDL
Through incorrect installation and insufficient maintenance, malfunctions of the BDL may occur.
These can affect the indications and lead to misinterpretations.
Danger!
Inadmissible operating parameters!
Under-running or exceeding the limit values involves risks for persons and the material, and mal-
function and service failures may occur.
Measures:
• Make sure that the BDL is operated only within the permissible limit values that are indicated on the
type plate.
• Exact compliance with the performance data of the BDL in connection with the case of application.
• Do not exceed the permissible storage and transport temperature.
Further safety advice :
• During installation and operation, the national regulations and safety instructions in force also need to
be observed.
• The BDL must not be employed in hazardous areas.
Additional instructions:
• Do not overheat the device!
6
®
can lead to significant
BDL only takes place within the permissible limit val-
personal injury and material damage.
METPOINT® BDL