Technical Data Bdl - Beko METPOINT BDL Instructions For Installation And Operation Manual

Technical data BDL

8 Technical data BDL
Color display
Supply voltage
Supply voltage for the sensors
Ambient temperature
Storage and transport temperature
Degree of protection
Connections
Interfaces
Sensor inputs
Dimensions wall housing
Weight
Housing material
Outputs
Memory card
Accuracy
Optional
Optional
Optional
10
7" touch panel TFT transmissive, graphics, curves, statistics
100 – 240 V AC/50 – 60 Hz, max. 75 VA
Output voltage: 24
Output current: 130 mA in continuous operation, peak 180 mA
Maximum output current
-one power
-two power supply units: 1 ampere
0...+50°C
-20...+70°C
IP 65
16 x threaded cable connection M12 x 1.5, clamping zone 3-7 mm
1 x RJ45 Ethernet connection
USB stick, USB cable, Ethernet/RS 485 Modbus RTU/TCP,
SDI and other bus systems upon request, web server optional
4/8/12 sensor inputs for analog and digital sensors, freely assignable
Digital BEKO Technologies sensors for the dew point and
consumption, with an SDI interface FS109/211 DP109/110 series
Digital external sensors RS 485/ModBus RTU, other
bus systems can be implemented upon request
Analog BEKO Technologies sensors pressure, temperature, and clip-on
ammeter preconfigured
Analog external sensors 0/4 – 20 mA, 0 - 1/10/30 V,
pulse, Pt100/Pt1000
Dimensions: 300 x 220 x 109 mm
7.3 kg
Aluminum, powder-coated, front foil polyester
4 relays (max. switching voltage: 400 VAC / 300 VDC, switching current
min. 10 mA, max. 6 A), alarm management,
freely programmable, collective alarm
As regards sensors with an internal signal output, the analog output and
pulse are looped through, e.g. the DP/FS series
2 GB memory card standard, optional up to 4 GB
See sensor specification
Web server
Fast measurem. with a scan rate of 10 ms for anal. sensors,
Max-/min indication per second
Option "consumption evaluation" statistics,
Daily/weekly/monthly reports
VDC ± 10% galvanically
across all
supply unit:
isolated
channels with
400 mA
relays
METPOINT® BDL