Beko METPOINT BDL Instructions For Installation And Operation Manual page 68

Operation BDL
Main menu  Settings  Device settings System update  Check USB stick for available updates
If an older software version is to be installed, the update folder and the update options (software, pictures,
etc.) need to be selected manually.
Main menu  Settings  Device settings System update  Update selection
BDL update for all of the selected options (software, pictures, etc.).
Important:
If, subsequent to the update, the
68
In the event that, after having pressed the
check USB stick for new software updates
button, the following messages appear in
the window, the BDL is not correctly con-
nected with the USB stick, or no data are
available.
When the BDL is correctly connected with
the USB stick, the lettering is black, and on
the left, the different update options are indi-
cated with a green tick (software, pictures,
etc.).
To the right of these, the current (old) and
the newly available (new) versions are
shown.
restart button appears, it must be pressed to restart the BDL!
METPOINT® BDL