Definition Of The Operations - Beko METPOINT BDL Instructions For Installation And Operation Manual

The same procedure applies to all operands (1

14.2.7.4.3 Definition of the operations

Main menu  Settings  Sensor settings  Virtual channels  V1 1
The same procedure applies to both operators (1
METPOINT® BDL
By pressing the desired channel button, e.g.
A1b, the selection is accepted.
If the const. value
value needs to be determined via the numeric
keypad. By pressing the
is accepted.
By means of buttons
be corrected.
Button  erases the last character
Button Clr erases the entire value
st operand, 2 nd operand, and 3
By pressing the text field
with the available mathematic operands will
appear.
Selection and acceptance of the operand is
implemented by pressing the desired button.
Actuating the not used
the operation with the related operator.
st operation and 2 nd operation)
Operation BDL
button was pressed, the
OK button, the value
 and Clr, the values can
rd operand).
st operation
1 st operation, a list
button will deactivate
77