Replacing The Friction Linings; Replacing The Horizontal Friction Lining - Siemens MOBILETT Plus HP Service Instructions Manual

Mechanical systems
Fig. 27

Replacing the friction linings

Replacing the horizontal friction lining

•
Remove the joint covers.
•
Remove the locking nut.
•
Remove the screw and disc springs.
•
Replace the horizontal friction lining.
•
Remount the screw and disc springs (Fig. 27). Secure the screw with the locking nut.
•
Adjust the horizontal friction linings. Refer to the section: "Adjustment of the friction
linings", Page 10 - 4.
•
Reattach all covers.
Siemens AG
Medical Solutions
Locking nut
SPR8-220.061.03 Page 25 of 28
Rev. 03 09.03 CS PS 24
10 - 25
Disc springs
Friction lining
MOBILETT Plus HP
10
10