Siemens MOBILETT Plus HP Service Instructions Manual page 112

10 - 28
Fig. 31
•
Install the new friction linings according to (Fig. 31 or Fig. 32). There are two different
vertical friction linings. Both are equally suitable for the unit.
•
Reinstall the upper counter bearing.
•
Tighten the screws.
•
Check that there is no braking action on the counter bearings.
•
Tighten the adjustment screw. Make sure that the spring mechanism is under tension
before releasing the ceiling support.
•
Attach the column cover and side covers and the cover with the cassette compartment.
•
Check parallelism (see section "Parallelism").
•
Adjust counterbalance (see section "Counterbalance").
•
Adjust friction linings (see section "Adjusting the friction linings").
MOBILETT Plus HP
Mechanical systems
Fig. 32
SPR8-220.061.03 Page 28 of 28
Rev. 03 09.03 CS PS 24
Siemens AG
Medical Solutions