Data Used For Control - Mitsubishi Electric MELSEC Q Series User Manual

10 FUNCTION DETAILS

10.10.2 Data used for control

Symbol
Parameter Pr.101 External forced stop selection
Symbol
Monitor data Md.103 Forced stop input status
Set the following control data for the external forced stop control by external 24VDC.
Refer to Section 6.3 to 6.8 for the buffer memory address and details.
There are no set parameters for the forced stop input signal [Y2] with input signal
from PLC CPU.
Item
Check the following monitor data for the status of the forced stop.
Refer to Section 6.3 to 6.8 for the buffer memory address and monitor details.
Item
Select "Valid/Invalid" of the forced stop input by external 24VDC.
The status of the forced stop input can be stored.
10 - 20
MELSEC-Q
Details
Details