FRONT FORK
EAS00662
INSTALLING THE FRONT FORK LEGS
The following procedure applies to both of the
front fork legs.
1. Install:
D front fork leg
Temporarily tighten the upper and lower
bracket pinch bolts.
NOTE:
Make sure that the inner fork tube is flush with
the top of the handlebar holder.
2. Tighten:
D lower bracket pinch bolt 1
D upper bracket pinch bolt 2
D cap bolt 3
D front turn signal pinch bolt 4
WARNING
Make sure that the brake hoses are routed
properly.
4-45
CHAS
30 Nm (3.0 mDkg)
20 Nm (2.0 mDkg)
23 Nm (2.3 mDkg)
7 Nm (0.7 mDkg)