CLUTCH
INSTALLING THE PRIMARY DRIVE GEAR
1. Install:
D straight key
D primary drive gear 1
D thrust washer
D lock washer 2
D primary drive gear nut 3
NOTE:
While holding the generator rotor with the
sheave holder, tighten the primary drive gear
nut.
Sheave holder
90890-01701
EAS00298
INSTALLING THE CLUTCH
1. Install:
D clutch housing 1
D thrust washer 2
D clutch boss 3
D lock washer
D clutch boss nut
NOTE:
Make sure that the teeth on the lock washer are
correctly aligned with the grooves on the clutch
boss.
2. Tighten:
D clutch boss nut 1
NOTE:
While holding the clutch boss with the universal
clutch holder, tighten the clutch boss nut.
Universal clutch holder
90890-04086
3. Bend the lock washer tab along a flat side of
the nut.
4. Lubricate:
D friction plates
D clutch plates
(with the recommended lubricant)
Recommended lubricant
Engine oil
5-47
ENG
80 Nm (8.0 mDkg)
75 Nm (7.5 mDkg)