Cable Routing - Yamaha XVS250 2001 Service Manual

CABLE ROUTING

Rectifier/ regulator
1
Ignition coil #1
2
Ignition coil lead
3
Front brake light switch lead
4
Right handlebar switch lead
5
Brake hose
6
Throttle cables
7
Clutch cable
8
High tension code #1
9
Rear brake switch lead
10
Vacuum hose
11
Air induction system assembly
12
CABLE ROUTING
A Clamp the vacuum hose.
Avoid the bold section.
B To the carburetor joint.
C Connect the ignition coil lead.
(orange lead: upper)
(red lead: lower)
D Route the right handlebar
switches lead and front brake
switch lead through the hole of
frame from inside to out side.
E Clamp the rear brake switch
lead.
F To the cylinder head (#2).
G Clamp.
H To the engine.
2-26
SPEC