Removing The Generator - Yamaha XVS250 2001 Service Manual

GENERATOR AND STARTER CLUTCH
5-35

REMOVING THE GENERATOR

1. Remove:
D footrest/shift pedal
Refer to "ENGINE REMOVAL".
D generator cover
2. Remove:
D generator rotor nut 1
D washer
NOTE:
D While holding the generator rotor 2 with the
sheave holder 3 , loosen the generator rotor
nut.
D Do not allow the sheave holder to touch the
projection on the generator rotor.
Sheave holder
90890-01701
4. Remove:
D generator rotor 1
(with the flywheel puller set 2 )
D woodruff key
CAUTION:
To protect the end of the crankshaft, place
an appropriate sized socket between the fly-
wheel puller set's center bolt and the crank-
shaft.
NOTE:
Make sure that the flywheel puller is centered
over the generator rotor.
Flywheel puller set
90890-01362
ENG