ADJUSTING THE THROTTLE CABLE FREE PLAY
EAS00058
ADJUSTING THE THROTTLE CABLE FREE
PLAY
NOTE:
Prior to adjusting the throttle cable free play, the
engine idling speed should be adjusted.
1. Check:
S throttle cable free play a
Out of specification Adjust.
Throttle cable free play (at the
flange of the throttle grip)
3 X 5 mm
2. Remove:
S fuel tank
3. Adjust:
S throttle cable free play
Carburetor side
a. Loosen the locknut 1 .
b. Turn the adjusting nut 2 in direction a or b
until the specified throttle cable free play is
obtained.
a
Direction
b
Direction
c. Tighten the locknuts 1 .
NOTE:
If the specified throttle cable free play cannot be
obtained on the carburetor side of the cable, use
the adjusting nut on the handlebar side.
Handlebar side
a. Loosen the locknut 1 .
b. Turn the adjusting nut 2 in direction a or b
until the specified throttle cable free play is
obtained.
a
Direction
b
Direction
c. Tighten the locknut 1 .
3-11
CHK
ADJ
Throttle cable free play
is increased.
Throttle cable free play
is decreased.
Throttle cable free play
is increased.
Throttle cable free play
is decreased.