Installing The Carburetor; Measuring And Adjusting The Fuel Level - Yamaha XVS250 2001 Service Manual

CARBURETOR
EB600051

INSTALLING THE CARBURETOR

1. Adjust:
D engine idling speed
Engine idling speed
1,200
Refer to "ADJUSTING THE ENGINE ID-
LLING SPEED" in chapter 3.
2. Adjust:
D throttle cable free play
Throttle cable free play
(at the flange of the throttle grip)
3
Refer to "ADJUSTING THE THROTTLE
CABLE FREE PLAY" in chapter 3.
EB600063
MEASURING AND ADJUSTING THE FUEL
LEVEL
1. Measure:
D fuel level a
Out of specification  Adjust.
Fuel level (above the line on
the float chamber b )
3
a. Stand the motorcycle on a level surface.
b. Place the motorcycle on a suitable stand to
ensure that the motorcycle is standing
straight up.
c. Install the fuel level gauge 1 to the fuel drain
pipe 2 .
Fuel level gauge
90890-01312
d. Loosen the fuel drain screw 3 .
e. Hold the fuel level gauge vertically next to the
upper face of the float chamber.
f. Measure the fuel level a .
NOTE:
Fuel level readings should be equal on both
sides of the carburetor assembly.
6-7
CARB
1,400 r/min
5 mm
4 mm