CRANKSHAFT AND CONNECTING RODS
EAS00408
INSTALLING THE CRANKSHAFT
1. Install:
D crankshaft assembly 1
CAUTION:
To avoid scratching the crankshaft and to
ease the installation procedure, apply
grease onto the oil seal lips and apply en-
gine oil onto each bearing.
EAS00418
ASSEMBLING THE CRANKCASE
1. Thoroughly clean all the gasket mating sur-
faces and crankcase mating surfaces.
2. Apply:
D sealant
(onto the crankcase mating surfaces)
Yamaha bond No. 1215
90890-85505
NOTE:
Do not allow any sealant to come into contact
with the oil gallery a .
3. Install:
D dowel pins 1
4. Tighten:
D crankcase screws
NOTE:
Tighten the screws in decreasing numerical or-
der (see numbers on the illustration).
5-63
ENG
7 Nm (0.7 mDkg)