Panasonic EBL512 G3 Planning Instructions page 163

Panasonic Eco Solutions Nordic AB
MEW01472 Rev: - Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x
Item
General fire alarm via progr. input
External fault via progr. input
Programmable outputs (= control
143
expressions)
Addressable 2 voltage outputs unit
3364
Interlocking Combinations
Presentation numbers / alarm points
that can be presented in the display(s)
in case of fire alarm
Presentation numbers
programmed
146
Zones that can be programmed
Faults
Disabled zones
Disabled alarm points (zone/address) +
Disabled COM loops
Disabled outputs
Disabled interlocking outputs
Sensors activating SERVICE signal
Max. number of AAF zones
(Max. 5 detectors per AAF zone.)
143
Approx. 1000 trigger conditions can be used in these control expressions.
144
Max. 100 user definable texts can be displayed "at the same time".
145 Presentation number is a ZONE only or ZONE – ADDRESS.
146
Any zone number between 001 and 999 can be used for the 512 zones.
147
Theoretically 999 zones can be programmed but according to EN54-2 it
shall be possible to present all "fire alarms" in the display, i.e. max. 512.
148
Zone/address disabled via time channel not included.
149
Control outputs disabled via menu H2/B7 and Alarm devices disabled via
menu H2/B8 not included.
150
Interlocking outputs disabled via 000/00 in menu H9/C4 not included.
151
Used in conjunction with the AAF Control, which is available on the
Australian market only.
161
C.i.e.
250
200
40
200
145
512
145
that can be 512
512
100
100
151
System
50
144
1000
512
30 x 512 =
15 360
147
512
300
512
148
200
149
200
150
200