Panasonic EBL512 G3 Planning Instructions page 74

Panasonic Eco Solutions Nordic AB
MEW01472 Rev: - Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x
12 Consecutive Heavy Smoke Alarm (sequence) (+start
Zone no. and address +stop Zone no. and address
+Quantity)
13 Two Address Dependent Fire Alarm (+Zone no.
+Address)
14 Two Zone Dependent Fire Alarm (+Zone no.)
15 Interlocking Input Area Activated (+Area no.)
16 Interlocking Input Area Point Activated (+Area no.
+Point)
17 General Interlocking Input Activated
18 Consecutive Interlocking Input Activated (sequence)
(+start Area no. and point +stop Area no. and point
+Quantity)
19 Fire Brigade Tx Activated
20 Fault Tx Activated
21 Fire Brigade Tx Disabled
22 Zone Disabled (+Zone no.)
23 Zone Address Disabled (+Zone no. +Address)
24 General Zone Address Disabled
25 General Fault
26 General Charge Fault
27 Reset Pulse Zone Address (+Zone no. +Address)
28 Time Channel Activated (+Time channel no.)
29 Alert Annunciation Activated
30 Alert Annunciation Acknowledged
31 Door Open (+Control unit)
32 General Door Open
33 Key Cabinet Open
34 General Control Disabled
35 Control Disabled (+Control unit)
36 General Alarm Device Disabled
37 Alarm Device Disabled (+Control unit)
38 Fire Door Closing (+Zone no. +Address)
39 General Service Signal
40 General Encapsulated
41 AAF Zone Alarm (+AAF zone no.)
42 Quiet Alarm Zone (+Zone no.)
43 Quiet Alarm Zone Address (+ Zone no. +Address)
44 Multiple Detector Alarm
45 One Detector Alarm
62
Only valid for the c.i.e. outputs (S0-S3, R0 and R1), 4581 outputs and
3361 outputs.
63
Not valid any more. This trigger condition will never be true.
63
72
62